Products

TRIOCOR anticorrosion materials have excellent coating and technological characteristics providing long-term efficacy of its protective components even in most challenging environments to oil and gas, infrastructure and energy facilities.

In compliance with the internationally accepted standardization system, and, namely, ISO 12944 and taking into account the corrosiveness of the environment, the type of surface to be protected, surface preparation, required lifetime the O3 specialists will select a suitable TRIOCOR coatings system to minimize the costs, to maximize efficiency and return on investments in the project.

Quick-drying primer

One-package quick-drying primer based on a synthetic film former.

Quick-drying topcoat

One-package quick-drying topcoat based on a synthetic film former. Offers good coverage rate and available in a wide range of colors (via RAL catalogue).  
A two-pack epoxy zinc rich primer

As a primer to give protection of steel as part of an anticorrosive coating system in severely corrosive environments up to C5-M as defined in ISO 12944-2 including industrial, oil&gas and infrastructure facilities. It has good resistance to splashes from sea water, fresh water, oil and refined products. May be used as a repair primer for galvanised surfaces.

Enamel-primer

One-component fast-drying anticorrosive enamel-primer, based on the organic solution of synthetic filming agent. Provides perfect weather resistant coating with good gloss and color retention.

Zinc-silicate coating

Fast-drying one-component material with zinc dust based on ethyl silicate. Coating is recommended for the protection of the steel surfaces from atmospheric loads and high temperatures (up to +400 °C).

Silicone-acrylic coating

One-component silicone-acrylic coating, pigmented with aluminum.

A two-pack high-build modified epoxy coating containing zinc phosphate

For use as a coating of steel substrates in industrial and marine exposed conditions including offshore, splash zones and sub-sea environments, petrochemical, seaport and offshore.
A two-pack acrylic polyurethane topcoat

As a topcoat to give protection of steel as part of an anticorrosive coating system in severely corrosive environments up to C5 as defined in ISO 12944-2 including industrial and infrastructure facilities. It has high-performance decorative properties and very good gloss and colour retention under UV rays.
A two-pack high-build modified epoxy zinc phosphate coating

Multi-functional epoxy coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5 as defined in ISO 12944, including industrial, oil&gas and infrastructure facilities exposed up to C5M as defined in ISO 12944-2. Not for immersion service.
High-build modified epoxy MIO-pigment primer

Multi-functional epoxy coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5 as defined in ISO 12944.
A two-pack epoxy phenolic coating

As an internal lining in tanks and vessels for brine, crude oil, refined products; suitable for insulated external carbon or stainless steel surfaces including equipment and pipework. Suitable for use at up to 180°C operating temperature (Dry Heat). Maximum temperature under insulation 150°C.
Two-component, polyamide epoxy, zinc-rich coating.

It has a low VOC level and contains 85% by weight of zinc dust pigment in the dried film.
DURA-PLATE® 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy.

It can be applied without dew point restrictions and over wet steel surfaces. 301W shows good chemical and abrasion resistance and good edge-retentive properties. It can be applied over steel prepared by hydroblasting, grit blasting or mechanical tooling.
Abrasion Resistant Epoxy Primer

A two-component pure epoxy high solids product. It has excellent physical properties such as adhesion, toughness, abrasion resistance, etc. as well as chemical resistance to salt water, fresh water, crude oil, alkalis and weak acids.
A high solids, tin free, polyurethane, with fast drying and high gloss attributes. For use where long term exterior gloss and colour retention characteristics are required.
A two pack isocyanate free finish based on an acrylic epoxy binder system.
5% discount on first order

When you sign up to receive news and special offers from O3!

Any questions? Write to us
Protection from automated form filling
 
Please type in the symbols shown in the image above*
We are in touch in WhatsApp +7 (926) 900-20-51
Мы на связи в WhatsApp +7 (926) 900-20-51